SunShade Accessory Assembly

Below are instructions to open and apply the SunShade Accessory to a GCI Outdoor product. The SunShade Accessory may not perform as intended when used with Pod-style chairs or rockers. It has been tested exclusively on GCI Outdoor products, performance with non-GCI Outdoor chairs cannot be guaranteed.

SunShade Accessory Assembly Instructions (Pictures Below)

1. Remove the SunShade Accessory from it's bag

2. Flip the top of the frame up and away from the clips

3. Flip open both sides of the frame. Holding the SunShade angled down with the top of the folded frame facing upwards will help gravity hold the top part of the frame open to separate the sides easier.

4. Hear the "Click" once the frame has been fully extended

5. Pull the front and back of the frame apart

6. Push down on the hinge tabs just above the clips to lock the shade into position. Repeat on the other side of the shade's frame

7. Squeeze the clamp to attach to the backrest on both sides of the chair.

8. Reverse the process to close the SunShade Accessory.